It is a certified double-walled chimney consisting of two pipes, an inner and an outer pipe.
The inner pipe of the double-wall flue shall be made of acid-resistant stainless steel grade 316L 1,4404. The outer pipe shall be bright stainless steel.
The flue insulation shall be a non-combustible thermal insulation of 50 mm stone wool mat with mesh. The thermal insulation protects the chimney against rapid cooling, retains heat and improves draught.
The elements of the double-walled flues are connected to each other using stainless steel rivets. The chimneys can be installed both inside and outside the sauna building.
The materials used in the production of the flue system elements are certified and do not pose a risk to human health.
IMPORTANT!!! When installing chimneys inside buildings, safe distances to combustible materials of at least 150mm must be maintained. When the chimney passes through building structures (slab, roof), openings of appropriate size shall be made in them, maintaining a safe distance from the surface of the chimney to combustible materials. Care shall also be taken to ensure that the connection between the flue elements is not installed in the building slab. The spaces between the flue and combustible materials shall be completely filled with ceramic non-combustible wool. If necessary, the filled cavities shall be covered externally with non-combustible finishing panels.
Chimney flue Ø 115
Set includes:
NP/NP Ø215/115 chimney stack pipe 1m or 0,5m
NP trident
NP tee shut-off nozzle - condensate collector
NP top nozzle
NP chimney cap-spark trap
Chimney mounting brackets 2 pcs
For the passage through the wall (to the inside of the room) an additional 0.5-0.7-1 m insulated flue pipe and insulated closing nozzle 215/115 are included !!!
