Sauna chimney set Ø 215/115 stainless steel

It is a certified double-walled chimney consisting of two pipes, an inner and an outer pipe.

The inner pipe of the double-wall flue shall be made of acid-resistant stainless steel 316L grade 1,4404. The outer pipe shall be bright stainless steel.

The flue insulation shall be a non-combustible thermal insulation of 50 mm stone wool mat with mesh. The thermal insulation protects the chimney against rapid cooling, retains heat and improves draught.

The elements of the double-walled flues are connected to each other using stainless steel rivets. The chimneys can be installed both inside and outside the sauna building.

The materials used in the production of the flue system elements are certified and do not pose a risk to human health.

IMPORTANT!!! When installing chimneys inside buildings, safe distances to combustible materials of at least 150mm must be maintained. When the chimney passes through building structures (slab, roof), openings of appropriate size shall be made in them, maintaining a safe distance from the surface of the chimney to combustible materials. Care shall also be taken to ensure that the connection between the flue elements is not installed in the building slab. The spaces between the flue and combustible materials shall be completely filled with ceramic non-combustible wool. If necessary, the filled cavities shall be covered externally with non-combustible finishing panels.

Internal flue Ø 115 (suitable for most factory sauna stoves)

Chimney outer Ø 215

Set includes:

NP/NP Ø215/115 chimney stack pipe 1m or 0,5m

NP top nozzle

NP bottom nozzle Ø 115

NP chimney cap-spark trap

NP ceiling finish

Chimney bracket

Roof sealant, flexible, silicone, brown or black (colour to be specified by phone)