The SKAMET SY-216/SY-220 wood-burning stove with external firebox is a sturdy wood-burning stove with external firebox, designed for small baths of 8-18 m³ and 16-25 m³. The round black steel net can hold up to 140 kg of stones. The stove heats up quickly, maintains the temperature well and the large amount of stones provides a large amount of steam. The stoves are durable because of the high quality steel used in their manufacture: combustion chamber-6mm, firebox and top (firebox)-4mm thick. With the right fuel and a sauna bath 1-2 times a week, the stove will last 8-10 years. The external diameter of the flue pipe outlet Ø115mm. The length of the flue pipe (through the wall) is 20cm.
| SY-216
Width, mm 560
Depth, mm760
Height, mm 840
Weight, kg 60
Length of the hanger through the wall, mm 200
Stones loaded, kg up to 140
Chimney diameter, mm 115
Vapour volume, m3 8-18
Manufacturer Skamet, Estonia |
SY-220
Width, mm 560
Depth, mm 760
Height, mm 840
Weight, kg 70
Length of the hanger through the wall, mm 200
Stones loaded, kg up to 140
Chimney diameter, mm 115
Vapour volume, m3 16-25
Manufacturer Skamet, Estonia |
|
| The stove can be equipped with a heat exchanger, glass door and soffit, and a water heater can be connected to the heat exchanger. |
|
| Door glass 230x230mm price 25 € |
| Trimming the corners price 45 € |
| Heat exchanger Black metal price 69 € |
| Heat exchanger Stainless steel* price 129 € |
| *(Heat exchanger for boiler, tank connection with 3/4" female thread, mounted on the left, right or rear of the stove) |
| Horizontal water heater (boiler) 80L* price 249 € |
| Stainless steel water heater (boiler) horizontal 80L* price 559 € |
| *Water heater connected to the heat exchanger of the stove. Diameter: 400mm, capacity: 80l, installation: horizontal or vertical. Working pressure up to 3,5 bar. Wall thickness of the heater: made of black metal - 3 mm, stainless steel - 2 mm. Connection to the water supply - 1/2″. Connection to the stove - 3/4″. |
|
|
| We recommend: |
| Because the outer shell of the sauna heater is coated with a temperature-resistant paint (black), which is fully cured when the sauna heater is first fired. Evaporating materials from the painted surface may have an unpleasant odour, so it is recommended that the first firing is carried out outdoors or in a well-ventilated sauna room where the stove will be located. Always fire the stove without stones for the first time; it is also forbidden to pour water on it. |
| Clean and dust the stones before placing them. Natural stones contain unsuitable impurities, such as sulphur, which make them unsuitable for use as firestones. We recommend that you choose stones designed for sauna stoves. |
| Dry wood is the best fuel for a sauna stove. The use of fuels with a high thermal energy output is prohibited. The manufacturer does not recommend filling the firebox with firewood to more than 2/3 of its volume, as overheating of the firebox is possible. This reduces the lifetime of the stove. |
|
Thermometer-hydrometer TFA 1052×47,00 €
Ceramic wool up to +1260˚C×25,00 €
Bathroom chimney pipe - 1m insulated×89,00 €