STEEL BUTTING NETWORK

The net is installed on the chimney to provide additional heat and to reduce the temperature of the flue gases. The mesh is suitable for chimney flue pipes with a diameter of 115-150 mm. It shall be installed on the sauna stove or on the stove stones and filled with sauna stones. The stones warm up and provide additional heat by preventing water from entering the pipe.

Before installation, make sure that:

- the required minimum safety distance is maintained throughout

- if the flue pipe is insulated at the point of installation of the mesh, then the mesh shall be filled with stones and the insulated part of the pipe installed

Installing the grid:

1. Install the sauna stove and fill it with stones according to the stove installation instructions.

2. Level the top edge of the stones. The grid can be installed on top of the smoothed stones and on the stove itself.

3. The flue pipe is installed first, then the chimney network can be installed. Stones shall be placed as densely as possible between the pipe and the mesh (preferably so that the pipe does not show through the stones).